It is very difficult to dry Tubing Encapsulated Cable products after entering water (such as blowing with hot nitrogen under pressure), and generally there is no corresponding equipment. In actual operation, if the Tubing Encapsulated Cable productsR6 gets water, we just saw off a few meters from the front end. If the whole Tubing Encapsulated Cable products has been watered, we can’t take it. Therefore, the prevention of water ingress of Tubing Encapsulated Cable products should be based on prevention, and the following measures should be adopted:

1. The head of Tubing Encapsulated Cable products should be sealed

The ends of the sawn off Tubing Encapsulated Cable products, whether they are stacked or laid, should be sealed with plastic (using a special sealing sleeve for Tubing Encapsulated Cable products) to prevent moisture from infiltrating.

2. Timely production of Tubing Encapsulated Cable products head

Tubing Encapsulated Cable products should be made in time after the wires are laid.

3. When purchasing Tubing Encapsulated Cable products

You must choose a manufacturer with excellent quality. Since the impurities and pores in the insulation are the starting point of water treeing, the quality of Tubing Encapsulated Cable products is very important to prevent water tree aging.